Replacing your garage door spring can seem like a daunting task, but it doesn’t have to be. With the right tools and some patience, you can easily complete this project in a few hours. This step-by-step guide will walk you through replacing your garage door spring in Suffolk, so you can feel confident knowing that the job is done.
Here’s what to expect: First, it’s important to measure and test the existing springs to determine if they are working correctly. Then, you’ll need to purchase the correct replacement spring and install it. Finally, adjust the tension to ensure that your garage door is operating safely and efficiently. So let’s get started!
And remember — safety should always be your top priority. When replacing a garage door spring, be sure to wear safety goggles, gloves, and other protective gear to avoid injury. Additionally, it’s a good idea to have someone help you, especially if the springs are large and heavy.
Now that all our safety precautions are in place, let’s get started on replacing your garage door spring!
- Measure Your Existing Springs — First off, measure and test your existing springs. Check to make sure they are the same size and weight as the new replacement spring you plan on purchasing.
- Purchase and Install Replacement Spring — Once you have the correct replacement spring, it’s time to install it. Follow all instructions that come with it for proper installation. Make sure to use gloves when handling the spring and wear safety goggles.
- Adjust the Tension — Finally, you’ll need to adjust the tension of your garage door spring to ensure it’s operating safely and efficiently. Use a winding bar tool to make these adjustments carefully — this is where having a helper comes in handy. When finished, test the spring by opening and closing the door several times to make sure everything is in working order.
And there you have it — your garage door spring has now been replaced!